- High-quality wall paint made from high-quality raw materials
- VOC free
- water-based
- easy to spread
- highly opaque, robust and impact-resistant
- Suitable for wallpaper, woodchip and plastered walls
*VOC free: All white paints and base colours are solvent-free. Depending on the selected colour, the base paint used and the colour pastes, the product may contain a small amount of VOC, i.e. a maximum of a few grams per litre
Determine absorbency
Check the absorbency of the substrate with a few splashes of water. If these are absorbed very quickly or dry immediately, the wall is highly absorbent and a primer such as To Prime Walls should be applied. Lime plasters, fresh gypsum plasters, renovation plasters or clay plasters are highly absorbent
Application instructions
The LittlePomp chalk varnish for indoor use is suitable for all common surfaces and gives furniture and toys a customised and chalky matt look in no time at all. Suitable for wood, metal, plastic coatings and mixed materials.
What would you like to use LittlePomp chalk paint for?
Your area of application
- Fresh plaster
- Painted with mineral colours
- Filled plasterboard panels
- Old walls with repaired areas
Preparation: Thoroughly clean the substrate and remove loose layers of paint. Repair imperfections with filler.
Priming: Priming with a Wall Primer/deep primer improves the even absorption of the wall paint and leads to a faster covering and more stable result.
Top coat: Top coat with LittlePomp chalk paint, can be painted over after 4 hours. Depending on the colour shade and substrate, several coats may be necessary.
Drying time
Dust-dry after approx. 0.5 hours, recoatable after approx. 4 hours The drying times given are average values and depend on the layer thickness, the substrate, the temperature and the relative humidity.
- Old dispersion coating
- Stone facing bricks
- Wallpaper
Preparation: Thoroughly clean the substrate and remove loose layers of paint. Touch up imperfections with filler.
Top coat: Top coat with LittlePomp chalk paint, recoatable after 4 hours. Depending on the colour shade and substrate, several coats may be necessary.
Drying time
Dust-dry after approx. 0.5 hours, recoatable after approx. 4 hours The drying times given are average values and depend on the layer thickness, the substrate, the temperature and the relative humidity.
We recommend for preparation
Instructions
- Masking (optional) & cleaning: Remove dust, dirt and loose layers of paint from the substrate. Touch up imperfections with filler. Mask off everything that is not to be painted. Please note that the preparation always differs depending on the project.
- Open the can carefully: Carefully remove the clips on the lid with our paint can opener or use a spatula or screwdriver. Bend the clips away from the bottom upwards. If you bend the clips away from the top of the can, they will pop less. Please note that the clips are under tension and hold your hand over them when removing them.
- Stir: Stir the chalk paint carefully.
- Pour the chalk varnish into the paint tray: Pour a little into the paint tray. Do not work directly out of the can to keep the can contents clean.
- Roll: Then wet the roller all around and lightly roll it out in the tray. Make sure that the roller is completely and sufficiently wetted with the paint. It should no longer have any dry patches.
- Apply the paint & allow to dry well: Apply the paint generously and evenly. For decorative mouldings and narrow areas, use our small pink brush and work in immediately with the roller. Depending on the colour shade and substrate, several coats may be necessary. Observe the recommended drying time.
Technical information
- Application with brush, paint roller, Airmix, Airless, Airless heated. Ready to use, if necessary dilute with max. 5% water
- Set ready for use
- Clean tools with soap and water
- From 8°C ambient and substrate temperature, relative humidity max. 85% RH.
- Coverage of approx. 6-9 m2/l , depending on the absorbency of the substrate
FAQ
Is LittlePomp safe for children and pets?
Yes! LittlePomp is toy-safe according to DIN EN 71-3, saliva-proof, antibacterial and VOC free**. It contains no harmful vapours and is therefore perfect for children's rooms, children's furniture and even toys. Pets are also on the safe side with LittlePomp.
Can pregnant women also work with the colour?
Yes, as the paint is solvent-free and virtually odourless, pregnant women can also paint without hesitation - even indoors.
What surfaces is the paint suitable for?
LittlePomp chalk paint can be used on all common wall and ceiling substrates, e.g. plasterboard, concrete, masonry, plaster, wood, wallpaper and even on surfaces that have already been painted.
Is the surface hardwearing?
Yes, it is impact-resistant, very easy to wash off (wet abrasion resistance class 1) and has high UV resistance - ideal for children's room walls that are subject to heavy use.
How high is the opacity?
The paint offers very high opacity (class 1) and in most cases covers with just one coat. However, depending on the colour shade and substrate, several coats may be necessary.
Do I need to prime before painting?
For highly or differently absorbent substrates such as fresh plaster or levelled surfaces, priming with Wall Primer/Deep Primer is recommended. Non-absorbent substrates can usually be painted directly.
How is the colour processed?
The paint is ready to use and can be applied with a brush, roller or sprayer. If necessary, it can be diluted with up to 10 % water.
Is the colour sustainable?
Yes, it is plant-, water- and chalk-based, vegan* and packaged in a recyclable tinplate can. The ingredients also support a healthy indoor climate.
* As far as the information is available.
The MissPompadour App