€29.90
Available, delivery time: 2 to 4 Working days
Very popular product: Bought over 1401 times during the last weeks
MissPompadour bonding agent for painting over silicone
To Seal Silicone is compatible with most commercially available paint systems. The white emulsion is particularly compatible with water-based paints. Use it on all existing silicone joints on doors, window frames and in sanitary areas. It canalso be used on glass seals, for example on windows. However, due to different window cleaners, no guarantee can be given for the adhesion of glass sealants.
To Seal Silicone can be used on all surfaces where silicone sealant prevents paint from sticking. It also helps if your paint drips off in unexpected places. This can be caused by unintentional and invisible contamination with silicone residue - a thin layer of adhesion promoter solves the problem.
Simple application: Apply silicone topcoat
Firstly, make sure that the silicone surface is dry and free of dust, grease and release agents. The surface must be cleaned with a commercially available cleaner. It is best to use MissPompadour To Clean. Do not use soaps or detergents for cleaning, otherwise To Seal Silicone cannot form a perfect adhesive bridge. To ensure that no residue remains, wipe thoroughly with clean water.
The bonding agent is ready to use immediately. Apply a thin layer of the emulsion to the dry silicone joint. Due to its white colour, you can then paint over it with any colour shade. At 21 °C, the stain can be painted over after approx. 5-6 hours. Once it has dried overnight, it is wet-resistant. It is finally cured after 21 days. To Seal Silicone can then also be subjected to mechanical loads.
Painting over silicone joints with MissPompadour To Seal Silicone
It is best to use a bevelled To Paint 25mm Fine MissPompadour Brush to apply the silicone bonding agent. Its fine bristles also make it easy to reach joints in corners.
| Application: | Zum Anstreichen von Fugen und Silikonoberflächen, Hohe Ergiebigkeit (ca.100 lfdm). Für Innen-/Außenbereich und Nassräume, Witterungs- und UV-Beständig |
|---|---|
| Content: | Colour: White |
| Processing: | It does not need to be mixed and can be used immediately |
| Quantity: | 125ml |
| To Seal Silicone: | Download technical data sheet |
To Seal Silicone contains 1,2-Benzisothiazol-3(2H)-one. May produce an allergic reaction. Safety data sheet available on request. Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist. Safe Handling: Keep out of reach of children. Ensure thorough ventilation during application and drying. Avoid eating, drinking, and smoking while using the paint. In case of contact with eyes or skin, rinse immediately and thoroughly with water. Clean tools immediately after use with water and soap. VOC: EU limit value for this product (Cat. A/d): 130g/l VOC (2010). This product contains max. 130 g/l VOC. Disposal: Follow local regulations. Do not release into sewage, waterways, or soil. Only completely empty containers should be sent for recycling. Dispose of liquid material residues at the collection point for old paint.
Manufacturer/Responsible person:
MissPompadour GmbH
Am Reitfeld 10, 93161 Sinzing, Germany
service@misspompadour.com
+49 941 206 068 20
* Country-specific requirements: France
- High coverage paints for every surface
- Painting made simple without sanding
- Personal customer service with professionals, for free!
- Made in Germany & EU
Therefore with To Seal Silicone
Creates a bridge between silicone and paint - Perfect adhesion for the varnish coat - Eliminates the need to remove silicone joints before painting - Eliminates the need to seal with silicone later
To Seal Silicone thus saves 2 work steps - in addition, the bonding agent allows joints that have the colour shade of the tiles, creating a calm, harmonious look.
