- Extremely elegant, low-pollutant wall paint
- Made in Germany
- Wipeable, breathable, preservative- and VOC-free
- Highly opaque (opacity class 1)
- Water-based
- Suitable for interior walls
- For plaster, wallpaper, plasterboard, woodchip, concrete & masonry in old & new buildings
Tip for your perfectly painted wall:pull the tape off the wall at an obtuse angle while the paint is still slightly damp. You can also find more tips for painting walls here
Application notes
Premium wall paint for interior use suitable for all common wall surfaces and ceilings. Plasterboard, concrete, masonry and (spray) plaster, stone-like panel materials, wallpaper and fibreglass fabric. Can be used on new substrates as well as substrates coated with latex or other conventional coatings.
Application
Preparation and application:
Stir the paint well and apply at temperatures from 5 °C. On plaster and textured wallpaper, apply the paint with a roller and brush. Always apply 2 coats of paint so that it can fully develop its velvety effect.
Coverage:
1 litre ofThe Valuable Wall Paint is sufficient for approx. 8m² with two coats. Coverage and coverage depend on the condition of the substrate.
Drying time:
"Hand dry" after 0.5 hours - Can be painted over after 4-5 hours. Fully loadable after 3 days.
Shelf life:
Can be kept for at least 12 months in unopened packaging if stored in a cool and frost-free place.
Dilution:
Our paint is ready to use. On highly absorbent substrates, the paint can be diluted with max. 5 % water for a primer coat.
Tip for your perfectly painted wall: pull the tape off the wall at an obtuse angle while the paint is still slightly damp. You can also find more tips on painting walls here
Your area of application
Painting highly or differently absorbent substrates:
- Fresh plaster
- Painting with mineral paints
- Levelled plasterboard
- Old walls with repaired areas
Preparation:
Thoroughly clean the substrate and remove loose layers of paint. Repair imperfections with filler.
Priming:
Priming with To Prime Walls improves the even absorption of the wall paint and leads to a faster covering and more stable result. Can be painted over after approx. 4 hours.
Top coat:
Top coat with The Valuable Wall Paint, can be painted over after approx. 4 - 5 hours. Depending on the colour shade and substrate, several coats may be necessary.
Painting of already painted or not highly absorbent substrates:
- Old emulsion paint
- Stone panelling
- Wood panelling (may require "To Bond & Block")
- Wallpaper
Preparation:
Thoroughly clean the substrate and remove loose layers of paint. Touch up imperfections with filler.
Top coat:
Top coat with The Valuable Wall Paint, recoatable after approx. 4 - 5 hours. Depending on the colour shade and substrate, several coats may be necessary.
Instructions
- Masking (optional) & cleaning. Remove dust, dirt & loose layers of paint from the substrate. Touch up imperfections with filler. Mask off everything that is not to be painted. Please note that the preparation always differs depending on the project.
- Open the can carefully. Carefully remove the clips on the lid with our paint can opener or use a spatula or screwdriver. Bend the clips away from the bottom upwards. If you bend the clips away from the top of the can, they will pop less. Please note that the clips are under tension and hold your hand over them when removing them. To open the can, it is best to use a paint can opener.
- Stir. Stir the paint carefully.
- Pour the paint into the paint tray. Pour a little into the paint tray. Do not work directly out of the can to keep the can contents clean.
- Wet the roller. Then wet the roller all round and roll it out slightly in the tray. Make sure that the roller is completely and sufficiently wetted with the paint. It should no longer have any dry patches.
- Apply The Functional Wall Paint & allow to dry thoroughly. Apply the paint generously and evenly. For decorative mouldings and narrow areas, use our small pink brush and work in immediately with the roller. Depending on the colour shade and substrate, several coats may be necessary. Observe the recommended drying time.
Technical information
- Application with brush or paint roller (see data sheet for details)
- ready to use, if necessary dilute with 5% water
- Clean tools with soap and water
- From 5°C ambient and substrate temperature, relative humidity max. 85 %, ideal application at 20° C and 65 % relative humidity
- approx. 8 m²/l, depending on the absorbency of the substrate
FAQ
What is so special about The Valuable Wall Paint?
The Valuable Wall Paint is the highest quality wall paint from MissPompadour. It offers a velvety matt surface, a particularly elegant depth of colour and excellent coverage. It is abrasion-resistant, stable and gives every wall a luxurious finish.
For which rooms is The Valuable Wall Paint suitable?
Thanks to its low-pollutant composition, The Valuable Wall Paint is ideal for bedrooms, living rooms and offices - in other words, for all areas where a healthy indoor climate is particularly important.
What benefits does The Valuable Wall Paint offer for the indoor climate?
The paint is open to diffusion, which means it allows the walls to "breathe". It also releases virtually no volatile compounds during painting and drying - ideal for sensitive interiors.
How is The Valuable Wall Paint applied?
Stir well before use. Apply the colour with a brush or roller, preferably at temperatures above 5°C. Two coats should be applied to fully develop the velvety, elegant finish.
How productive is The Valuable Wall Paint?
One litre is sufficient for approx. 8m² with two coats. The actual coverage depends on the substrate and application.
How quickly does the colour dry?
The paint is dry to the touch after approx. 30 minutes, can be painted over after 4-5 hours and is fully resilient after 3 days.
Can the colour be thinned?
Yes, for highly absorbent substrates, "The Valuable Wall Paint" can be diluted with up to 5 % water for the first coat. Otherwise it is ready to use.
What is the shelf life of The Valuable Wall Paint?
At least 12 months in unopened packaging - provided it is stored in a cool and frost-free place.